[stabilo]

HDD Health semble n'indiquer aucun soucis avec mon disque.
J'ai: (c'est peut être un peu long)

Drive model         WDC WD740GD-00FLA1
Drive capacity          72,6 GB
Drive serial number         WD-WMAKE1661588
Firmware revision         27.08D27
Number of cylinders         16383
Number of heads         16
Number of sectors per track         63
Number of LBA sectors         145226112
DMA support         Enabled
LBA support         Enabled
IORDY support         Enabled
ATA software reset         Not required
Overlap operation         Supported
Command queuing         Not supported
Interleaved DMA         Not supported
Multiword DMA mode supported         Mode 2 and below
PIO transfer mode supported         Mode 4
Minimum Multiword DMA transfer cycle time per word         120 ns
Manufacturer’s recommended Multiword DMA transfer cycle time         120 ns
Minimum PIO transfer cycle time without flow control         120 ns
Minimum PIO transfer cycle time with IORDY flow control         120 ns
ATA standard version         ATA/ATAPI-6 and below
SMART feature set         Supported, Enabled
Security Mode feature set         Supported, Disabled
Removable Media feature set         Not supported
Power Management feature set         Supported
PACKET Command feature set         Not supported
Write cache         Supported, Enabled
Look-ahead         Supported, Enabled
Release interrupt         Supported, Enabled
SERVICE interrupt         Not supported
DEVICE RESET command         Not supported
Host Protected Area feature set         Supported
WRITE BUFFER command         Supported
READ BUFFER command         Supported
NOP command         Supported
DOWNLOAD MICROCODE command         Supported
READ DMA QUEUED and WRITE DMA QUEUED commands         Supported
CFA feature set         Not supported
Advanced Power Management feature set         Not supported
Removable Media Status feature set         Not supported
Power-Up In Standby feature set         Supported, Disabled
SET MAX security extension         Supported, Disabled
Automatic Acoustic Management feature set         Supported, Enabled
48-bit Address feature set         Supported
Device Configuration Overlay feature set         Supported
FLUSH CACHE command         Supported
FLUSH CACHE EXT command         Supported
SMART error logging         Supported
SMART self-test         Supported
Media serial number field words         Not supported
Media Card Pass Through Command feature set         Not supported
Streaming feature set         Not supported
General Purpose Logging feature set         Not supported
WRITE DMA FUA EXT and WRITE MULTIPLE FUA EXT commands         Not supported
WRITE DMA QUEUED FUA EXT command         Not supported
World wide name         Not supported
URG bit for READ STREAM DMA and READ STREAM PIO commands         Not supported
URG bit for WRITE STREAM DMA and WRITE STREAM PIO commands         Not supported
Time-limited Read/write feature set         Not supported
Read Continuoud and Write Continuous in the Time-limited Read/write feature set         Not supported
Ultra DMA mode selected         Mode 5
Ultra DMA mode supported         Mode 6 and below
The time required for the SECURITY ERASE UNIT command to complete         Value not specified
Time required for Enhanced security erase unit completion         Value not specified
Master Password Revision Code         Not supported
Device vendor’s recommended acoustic management level         254
The current automatic acoustic management level         128
Removable Media Status Notification feature set         Not supported
Enhanced security erase unit feature         Not supported
The security count is expired and SECURITY UNLOCK and SECURITY ERASE UNIT are command aborted until a power-on reset or hardware reset.         
Maximum average RMS current         301 Milliamperes
         
Start/Stop Count (Power on count)         1220 times
Reallocated Sectors Count         342 sectors
Power-On Hours         18121 minuties (hours)
Device Power Cycle Count         1145 times
Temperature         35 °C
Reallocation Event Count         7 events
Current Pending Sector Count (Unstable sectors)         0 sectors
Uncorrectable Sector Count         0 sectors
UltraDMA CRC Error Count (total)         970 errors
Write Error Rate (Multi Zone Error Rate)         0